Inquisition Buttons (Recycling Worbla)

Karin Olava Effects shared this great idea for turning your Worbla scraps into buttons. You can use this idea to make any sort of design, or even make small creatures or pendants (perfect for gifts!)

Got worbla scraps?

I have a lot of worbla scraps and leftovers that I don’t really know what to do with. Of course you can shape it into spikes and skull details for you armour, and some ever make new sheets from it. But I’m going to show you how you can make geeky little gifts for your friends! It’s quick, easy and fun!

button1
Fist you are going to need some buttons. I use leftover ones from work. Then gather your worbla scraps, heat and start shaping it into the patterns you want. Because of all the Dragon Age Inquisition updates from Bioware lately, I’ve opted for some Inquisition logo styles. If the worbla won’t stick to the button once it’s cooled down, just glue it down with some contact glue.

button2
When you have your base done, it’s just to prime with woodglue. Some people prefer to use gesso, but for something quick like this I just add three layer of woodglue. After that it all dry it’s just to pick you colors and paint! I use normal acrylic paints. And for a more beaten up look I like to weather my pieces. Here I simple paint on some black in the nooks and crannies and wipe it off with a paper towel. Leaving some paint for a dirt like effects. You can of course go over with more brown tones for a rusty look.

button3
You could just clearcoat them now and be happy, but I’m going about this is typical Dragon Age style. Blood, blood and more blood! >D I like to use Skin Illustrator alcoholic paints in blood tones for this, but normal acrylic paints should do the trick.

Then just a coat of clear lacquer and you done! Neat little geek accessories for you and your friends! And an easy way to get allies for the Inquisition ;)
button4

Thanks to Karin Olava Effects for sharing this with us!

Recycling Worbla Scraps

Every bit of Worbla can be used, so make sure to never throw your scraps out! Below are a few ways to repurpose your Worbla scraps.

FC Cosplay gave us this quick tutorial on forming your scraps back into sheets with help from a pasta roller.

RecyclingWorbla

The Process:
Scrap Worbla: I keep everything from larger pieces that don’t fit smaller pieces to shavings that come off cleaning up edges.. Anything I can’t immediately reuse gets cut down and tossed in a plastic bag while I work.

Pasta Maker: Choose a pasta maker that is intended for actual regular use in a kitchen. It doesn’t have to be fancy and you don’t need extra attachments. Initially, I used a pasta maker packaged for use with polymer clay, but it turned out to be flimsy and a crucial part (that adjusts the thickness) wore out quickly. You can also get a far greater variance in thicknesses with kitchen-ready pasta makers.

    1) Attach your pasta maker securely on a stationary table or counter.

    2) On a heat-resistant surface (aluminum foil, cardboard), lay your scrap Worbla out flat but slightly overlapping so you have one big piece that would fit the horizontal limit of your pasta-maker. Avoid laying the scraps down too thick – i would say no more than 3 layers.

    3) Heat the Worbla as per normal (it should have a fruit-roll-up tackiness to it) and run the Worbla through at a relatively thick setting (this varies from machine to machine – i’d say anywhere between 2-3mm thick is fine). It’s ok if there are holes; just reheat the sheet and fold the Worbla over, running it through again until you’re happy with the consistency.

    4) Adjust the pasta maker to produce successively thinner pieces as needed.
    This process may create some wrinkling in your sheets of scrap Worbla, but this can be mostly fixed by reheating where necessary. A bag of roughly 1-1.5kg in scrap tends to generate maybe five or six long strips of 1mm Worbla. If you use permanent marker on your Worbla like I do, you’ll probably also notice some streaking. This is normal and doesn’t affect use of the material at all.

We also have a video from Rachelle Cosplay showing the process using small scraps and a clay roller. (We do suggest a pasta roller for this method if available, as we have heard from folks clay rollers break down quickly when used with Worbla!)

 
 

Kamui uses her scraps to make sculptural elements, and things like bracelets.
10552357_876918322336682_1956104267749658036_n
To help keep your fingers from getting burned while working with heated Worbla, try working with gloves, or dipping your fingers in water before handling the Worbla.
 
 

Raven Wei shows how she used scraps for her Lumina’s delicate heel and shoulder embellishments. Heat your scraps (carefully) and you can mold them together into a putty that can be wrapped around forms, carved, shaped and sanded.



 
 
Atashi Cosplay shared this video showing the process of recycling her scraps.

 
 

Valerei shared this method of making new Worbla sheets without needing a pasta roller.
step 1:
take all those scrap pieces you have, remember to never throw away even small pieces, because they can always be used for other things!
step 2:
Put them together in a way that they cover a big area and doesn’t have any gaps between them.
tumblr_inline_npwfa8WRL31qh2wzi_500
step 3:
put some wax paper both over and under the worbla(I used paper that you cut out patterns with, but I think wax paper is the right choice here), and then get your iron.
Try out what temperature works the best with your iron, I had to use the warmest setting on our iron.
tumblr_inline_npwfbmoZfC1qh2wzi_500
step 4:
iron it heavily, make sure to also turn it over so you iron on both sides
tumblr_inline_npwfm74UoF1qh2wzi_500
step 5:
now get out that rolling pin of yours and start rolling!
tumblr_inline_npwfnpzNIg1qh2wzi_500
Step 6:
Repeat step 4 and 5 until you get a result that you are pleased with. This might take some time depending on how picky you are with the result.
step 7:
let it cool down a bit, then remove the paper and VOILA! a kinda flat piece of worbla!
tumblr_inline_npwfprAtc31qh2wzi_1280
it IS more flat than it looks here, I promise!