The Glamorous Gamer Girls’ own Coco Rocha gave us a breakdown of her breastplate for her League of Legends Tryndamere costume.
I’m still getting the feel for working with Worbla. It was an amazing experience as I mentioned in my other post and I’d like to share how I made my breastplate. When I was looking for tutorials I couldn’t find clear ones so here is my own version of how I made mine. I’m just going to go through a few steps/ tips when making your Worbla breastplate, it’s not extremely detailed since this was a rushed project but hope it helps anyways.
Worbla can stretch, mold within itself and be reshaped when reheated. I used a cut sphere as a reference to mold on top of. Just cover it in aluminum foil to prevent it from melting, and then put a plastic wrap on top so that when you mold on top of the half sphere it won’t stick on it. I used 2 layers of worbla for the cup so that its stronger and doesn’t melt easily and lose shape when I’m adding details.
Once you have the boob shape you can cut it down to a shape that’s more natural. I also used this method to make my helmet as you can see in the image. All you need is something to support it while shaping it and you can make any shape or size you want. I attached the boob molds on the band with a strip of Worbla on the front and back side. I made the bustier band part by wrapping it around my body and using a mannequin to see where I should cut the cups. Sorry I don’t have an image of this, but I just cut a straight band. After securing the boob molds I just added the details I wanted. This is why I used two layers of the Worbla. When trying to add details on the base of a worbla project it can melt because you need to heat up both pieces to stick them together. The two layers prevent the Worbla from warping your base shape. The back I attached by using parachute clips. I wish I finished it another way because I find it ugly, but it was easy to put on and an easy solution to putting it on your body. An alternative I’ve seen other people use is metal loops and then string to tie it up with an overlap. The worbla is very strong, you can make straps and attach anything to it like the buckles shown below. Just make sure that you heat up both sides and ensure its stuck on so it doesn’t rip off. In my experience I had no problem with the buckles at the back and it withstands a lot of pressure.
Here is the final result of the Worbla breastplate armor. The inside you can see how I put the pieces of Worbla together. I didn’t double side it to save money, but if you can try to add the Worbla on the back as well.
Hope you enjoyed that and helped with your future projects!
Thanks again to Coco Rocha!